Upon initial system initialization, the ONE platform start screen will be presented.
Tap Proceed to select the target drone model by accessing the "DRONES" menu.
Allow the remote controller to complete its device reconfiguration sequence. Caution: Interrupting this process by powering off or restarting the device is not permitted.
Power on the selected drone and initiate the pairing protocol. Activate the drone's pairing mode by pressing and holding its battery power button.
On the remote controller, simultaneously depress and maintain pressure on the C1, C2, and Video record buttons until auditory confirmation (beeps) and a visual indicator (flashing blue status light) are observed.
Launch the designated flight control application and authenticate using your authorized credentials.
Ready for flight. proceed after the drone achieves satellite positioning.
Takeoff without satellite acquisition is permitted on the 1001 firmware. All commands available within the 1001 firmware environment are fully functional in standard operating mode.
To minimize the flight application or any other active application, execute a double-tap on the remote's Back button or perform an upward swipe gesture from the bottom screen edge.
The Recent applications menu, which displays all currently running processes, is accessed by pressing Back + 5D button (left).
A system notification panel is available for quick access to system settings and remote controller functions. This panel can be opened in two ways: by pressing Back + 5D button (down) or by swiping down from the top of the screen.
The menu for third-party applications is opened using the dedicated hardware button on the remote controller, labeled "Third-party appliacation menu".