Installing ONE on DJI RC Pro (RM510 / RM510B)

WARNING! The controller must be activated before proceeding with the firmware installation.

Video guide

Purchase 2 CTK via our bot @circle_os_store_bot — the balance will update automatically.
Connect the controller to your PC. After it loads, wait about 1 minute (check the battery and perform a full device reset).
Click the “Register” button.
Deduct 2 CTK to register the controller.

In the Companion window, click “Install (Update)”.

The installation window will appear. Starting with Companion version 3000, select the modification:

Fly 1.13.0 / Pilot 10 — main version of ONE apps
Fly 1.10.1 / Pilot 8 / ONE 2.0 tweaks — older app versions and tweaks from ONE 2.0

After that, click “Install” and wait for the installation to complete.

Once finished, the installation will continue on the controller itself.

Installation is now complete. You can begin using the ONE system!